Setting Up Your CODA 4680 Easy Connect – Quick Start Guide

  1. Unbox Your COD 4680 Easy Connect
    Ensure all components are included: device, power adapter, Ethernet cable, and user manual.

  2. Connect to Power
    Plug the power adapter into the device and then into a power outlet. The device should power on automatically.

  3. Connect to Your Network
    Using the provided Ethernet cable, connect the COD 4680 Easy Connect to your router or modem.

  4. Initial Configuration

    • Open a web browser on a device connected to the same network.

    • Enter the default IP address (e.g., 192.168.1.1) into the address bar.

    • Log in using the default credentials (usually found in the manual or on the device label).

  5. Run Setup Wizard
    Follow the on-screen prompts to configure your device settings: network name (SSID), security settings, and any other preferences.

  6. Save and Reboot
    Save your settings and reboot the device if prompted.

  7. Verify Connection
    Confirm that your device is connected to the internet and all indicators show normal operation.

  • 0 Users Found This Useful
Was this answer helpful?